Cone Crusher
Our Cone Crusher is the best cone crusher of the industry.The Cone Crusher also can use system of clears, make the arrange ore increase constantly, and then make the unusual matter out. Under the function of the cone crusher spring, the arrange ore mouth will reset automatically, the cone crusher resumes normal. The Cone Crusher has three types of rough, moderate and careful, you can choose to purchase according to your requirement.
Feature Of Cone Crusher:
1) High reliability
2) Flexible capacity
3) Over-loading protection
Working of the Cone Crusher:
The Cone crusher crushes materials by the working surface between the movable cone and fixed cone.The movable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the movable cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined adjusted.
Technical Data Of Cone Crusher:
| Type |
Weight
(T) |
Power
(kw) |
Outside diameter Of crushing cone (mm) |
Max
Feeding
(mm) |
The adjusting range of discharger (mm) |
capacity
(t/h) |
| PYB |
600 |
5 |
30 |
600 |
65 |
12-25 |
20-40 |
| PYD |
5.5 |
600 |
35 |
2-13 |
12-23 |
| PYB |
900 |
11.2 |
55 |
900 |
115 |
15-50 |
60-105 |
| PYZ |
11.2 |
900 |
60 |
5-20 |
50-90 |
| PYD |
11.3 |
900 |
50 |
3-13 |
20-65 |
| PYB |
1200 |
24.7 |
130 |
1200 |
145 |
20-50 |
110-168 |
| PYZ |
25 |
1200 |
100 |
8-25 |
42-135 |
| PYD |
25.3 |
1200 |
50 |
3-15 |
18-105 |
| PYB |
1750 |
50.3 |
160 |
1700 |
215 |
25-50 |
280-480 |
| PYZ |
50.3 |
1700 |
185 |
10-30 |
115-320 |
| PYD |
50.2 |
1700 |
85 |
5-15 |
75-230 |
| PYB |
2200 |
80 |
260
280 |
2200 |
300 |
30-60 |
590-1000 |
| PYZ |
80 |
2200 |
230 |
10-30 |
200-580 |
| PYD |
81.4 |
2200 |
100 |
5-15 |
125-350 |
